• banner_home
  • banner1
  • banner2

pronue.fw

 

Air conditioning cleaning process:

An air conditioning system has two main components: Condenser and Evaporator coils. Usually made of copper tubes with aluminium fins.

The evaporator coil. Or indoor coil, is often described as the “Cold coil” because it provides indoor cooling by the blower inside of the furnace.

evaporatorcoil

cleancoilqe

The condenser coil, or outdoor coil is the “warm coil” as it rejects the heat as a fan bows outside air over the surface.

condensercoil

A coil cleaning program should be instituted when the coils are new, cleaning should be performed whit a frequency to prevent deterioration of the system.

As the air moving contains dust, dirt, pollen, moisture, grease, and other contaminants, the coils and fins get clogged, blocking air flow through the coils and interfere with the heat exchange. This causes the system to work harder and makes the system less efficient. Dirty coils increase operating pressure and temperatures that breakdown the compressor’s lubricant and can result in equipment failure. A failed compressor means no cooling and costly repair.

– Depending on how dirt the system is. There are different cleaning process:

  1. If the coil is contaminated with a light dust or dirt not adhered to the fins, blowing low pressure compressed air across the fins may be sufficient.
  2. In most of the cases, Applying an special coil degreaser and wash off the cleaner and dirt with water is sufficient.
  3. For more aggressive deposits, Stronger cleaning solutions or solvents is used, combined with pressure washers to remove the chemicals and dirt.

 

Contact Us Today

Aires Furnace and Duct Cleaning
Address: 16416 138 Street NW Edmonton, AB T6V 0G9 
Business: 780 - 475 3648 
Cell: 780 - 297 6653
Designed and Developed by Erick Andres Avila, Bogota Colombia email: avilaromero@gmail.com